News


Embossing silicone instruction

Time of Issue: 2020-07-21 23:59:27Views: 279287Embossing silicone

Embossing silicone instruction

XG-360KY-65

1.physical properties:translucent paste,easily shaped,high shore A.

_i6WLuAcSUWMat4Ysvor0w.jpg

2.Instruction:

(1).Embossing machine:upper mold tem.:150-180℃,Lower mold tem.:120℃;please set the temperature by mold and garment.

(2).mixture silicne with catalyst:XG-360KY-65 and Catalyst XG-360ZB,mixture ratio:10:1;mesh number:100-120

(3).Press pattern:put the printed pattern on press machine in 10-15seconds.

(4).The coarse cloth need patch process.press it by embossing machine after patching on printed silicone;please note : you patch on the printed silicne without dry surface.

3.Please do wash test in 24hours after pressing it.

4.It may be silicone poisoning caused by garment, or mold temperature if it's not dry after pressing it.

5.The technical report is our test result,only for your reference.please do your test before mass production.

XG Technical Department

Diglant

YR Silicone Co.,Ltd

XG Silicone

Dongtaiheng Industrial Zone, Changbu, Xinxu Town, Huiyang District, Huizhou city, China

电话

+86 752 3620489 / 3522761

XG Silicone

 +86 752 3522837

XG Silicone

EU certification >

XG Silicone

Leave a message >

Please leave us a message!

My status
My status

Copyright ©YR Silicone Co.,Ltd. all rights reserved